Before you call your local Mr. Appliance®, there are three easy things you can try in order to get rid of a few common Samsung washer error codes:
- Rebalance your laundry load so that your items are spread evenly inside your washer.
- Reset your machine by unplugging it, waiting 10 seconds, and plugging it back in.
- Verify that your drain hose isn’t bent to avoid drainage and leakage issues.
Causes for Samsung Washing Machine Error Codes
Oftentimes, the main cause of an error code is a simple issue, like a poorly balanced load or a sock stuck in the washer door.
Sometimes, though, the issues are better left to the pros.
We’ve compiled the following list of codes to help you decide whether you should tackle the error on your own or call a professional. If you give it your best shot and can’t clear the code, it’s best to contact your local Mr Appliance for washer repair service.
Samsung Washer Error Codes
Possible Codes
|
Meaning
|
Solution(s)
|
nF1, 14C2, 4E2, 4C2, CE
|
Incorrectly installed hot/water supply hoses
|
Connect the cold water hose to the cold inlet and the hot water hose to the hot inlet.
|
1E, 1 LC, LC, LE, LC1, 1 1C, 1C
|
Machine is leaking, or there’s an issue with your machine’s water level sensor
|
1. Check your machine for leaks. Call an appliance professional if you find one.
2. Make sure the supply and drain hoses behind the washing machine aren’t twisted.
3. Set up the washing machine to run an empty cycle to see if suds appear. If they do, too much detergent was used.
|
4E, 4C, 1 4C, nF
|
The water is filling incorrectly
|
1. Ensure that water supply hoses and inlets are connected correctly.
2. Check the drain hose to make sure it’s not kinked.
3. Restart your washer and try to run a cycle again.
|
5E, and, 5C, SE, 1 5C, SC
|
Water won’t drain
|
Before trying any solution, let any hot water cool to eliminate the possibility of injury while draining. Then:
1. Make sure your machine is leveled.
2. Ensure that your drain hose isn’t kinked or damaged.
3. Restart the washer cycle.
|
dS, 1dC1, d5, 1dC4, FL, 1 dC, LO, L0, dC1, dC, dE2, dE1, dE
|
The washer door isn’t closed and locked
|
1. Make sure no laundry is caught inside the door.
2. Verify that the door is closed.
3. Check for damage to the door latch.
|
dc, Ub, U6, Ur, UE, 1Ub, 1U6
|
Load distribution is uneven
|
Redistribute the clothes in your washer.
|
Switched Hot and Cold Water Hoses
- Samsung Washing Machine Error Codes: nF1, 14C2, 4E2, 4C2, CE
- Meaning of Error Codes: The hot-water and cold-water supply hoses aren’t hooked up to the correct inlets.
- Ways to Fix the Error: Connect the cold-water hose to the cold inlet and the hot-water hose to the hot inlet.
Leaking Machine or Faulty Water Level Sensor
- Samsung Washing Machine Error Codes: 1E, 1 LC, LC, LE, LC1, 1 1C, 1C
- Meaning of Error Codes: Your machine either has a leak or the water level sensor is malfunctioning.
- Ways to Fix the Error:
- Make sure that your machine doesn’t actually have a leak. If it does, contact an appliance professional to repair it.
- Look behind your machine to verify that no hoses are kinked or twisted. If they are twisted, you can untwist them. However, if your hose is damaged, you’ll need to contact an appliance professional for a replacement.
- Run your washer without any laundry items in it. If you see suds, chances are, you used too much laundry detergent.
Water Filling Incorrectly
- Samsung Washing Machine Error Codes: 4E, 4C, 1 4C, nF
- Meaning of Error Codes: Your washer is not dispensing its water correctly.
- Ways to Fix the Error:
- Ensure that the cold and hot water supply hoses are connected to the appropriate cold and hot water inlets.
- Untwist your drain hose if it’s bent in any way. Call an appliance professional if the hose is damaged.
- Restart your machine by unplugging it and plugging it in again. Run a full wash cycle.
Water Won’t Drain
- Samsung Washing Machine Error Codes: 5E, nd, 5C, SE, 1 5C, SC
- Meaning of Error Code(s): The water in your machine’s tub is draining slowly or not draining at all.
- Ways to Fix the Error: Before attempting to fix this error, please let any heated water cool first to avoid the risk of injury. Then:
- Confirm that your washing machine is not tilted toward one side. If it is, level it to see if this fixes the issue.
- Check your drain hose to make sure it’s not kinked or damaged. Damaged drain hoses require replacement.
- Restart your washer’s wash cycle.
Door Issue
- Samsung Washing Machine Error Codes: dS, 1dC1, d5, 1dC4, FL, 1 dC, LO, L0, dC1, dC, dE2, dE1, dE
- Meaning of Error Code(s): The door to your appliance won’t close and lock properly.
- Ways to Fix the Error:
- Verify that no laundry is caught in your machine’s door, preventing it from locking.
- Make sure you did not accidentally leave your washer’s door partially open.
- Examine the door latch for damage. If there is damage, the part will need to be replaced by a qualified appliance professional.
Uneven Load Distribution
- Samsung Washing Machine Error Codes: dc, Ub, U6, Ur, UE, 1Ub, 1U6
- Meaning of Error Code(s): Your laundry load has items that are not evenly distributed inside the machine.
- Ways to Fix the Error: Spread out the clothes in your washer to ensure the load is even.
Additional Error Codes
If you’re seeing an error code not listed, refer to your appliance’s instruction manual or Samsung’s website for more information on its cause.
Find a Mr. Appliance Professional in Your Area
If error codes keep reoccurring, even after you have tried these fixes, don’t spend another minute deciding what to do about your Samsung washing machine’s error code. Call the appliance experts at Mr. Appliance or schedule an appointment online to get fast, reliable service for your Samsung washer.