Why Is My Gas Stove Clicking? A Kalamazoo Homeowner’s Guide to Detecting Stove Issues

Are you experiencing your gas stove clicking? Were you going to cook your dinner, but to your unfortunate surprise, you find that your gas stove burners won’t work? When your gas burner clicks but won’t produce a flame, you’re likely dealing with gas stove igniter problems. In some cases, ignition issues can be solved on your own, but in some cases, a stove repair may be necessary.

Our Kalamazoo appliance repair professionals have tips and tricks that you can try to get the flow of power back to your burner ports and stop your gas stove from clicking sounds. Sometimes, the electric current between your spark switch and spark modules malfunctions due to liquid spills, or a dirty burner head. Sometimes your gas stove clicks because you need to replace a defective ignition switch, but it’s not always easy to tell.

When all else fails, we recommend you address your gas stove-clicking issues by calling in our professionals for gas stove top repair services. At Mr. Appliance of Kalamazoo, we are the experts in the appliance repair industry, with years of experience serving homeowners all around the Kalamazoo County area.

Keep reading to find out the possible reasons why your gas stove is clicking.

Why Is My Gas Stove Clicking? Here Are the Common Problems

1. Gas Stove Clicking Due to Misaligned Burner Caps:

The first thing to check for if your gas stove is clicking is if the burner control knobs are misaligned. Constant clicking noises on your gas range can be caused by your burner control knobs being misaligned. When the burner head isn’t properly aligned, the gas stove will be unable to ignite. It is easy to realign your burner ports; just wait until your stove has completely cooled and remove the burner grate. Then put the burner cap back on but make sure it’s center, and now try to ignite your gas stove!

2. Gas Stove Clicking Due to a Dirty Burner or Wet Burner:

Sometimes a dirty burner prevents proper ignition on your gas stove top. If your gas stove is clicking Kalamazoo, it is important to clean the surface to remove any food scraps or food residue. If the area is barren with moisture, the ignition switch will not produce a flame. You need to make sure that any water, grease, and other food debris are completely removed, and that your stovetop is dry. Leave the stove for a few hours before trying again if it is submerged in water. You need to give the system proper time to dry out.

• Food particles and excess moisture can cause the ignition to fail on your gas stove top. If your gas stove is clicking, you can try these cleaning tips:
• Clean the burner heads, caps, and igniter.
• Clean the pilot and burner holes
• Moisture after cleaning can cause continuous clicking. Air drying for a few hours should give the unit time to dry out, but if you have excess water then you can place a fan near the system to dry it out.

3. Gas Stove Clicking When Your Gas Supply Valve Isn’t On:

In most cases, you only touch the gas supply valve if you need to shut off the gas. But if you are having issues with your gas cooktop, it may not be working properly because your gas supply valves are turned off. Turning the gas back on may resolve your gas stove-clicking problem. Once you can locate your gas supply valve, which is typically behind your oven, you just rotate the knob to turn it back on.

You should also check the outlet that the stove is plugged into to make sure you didn’t trip the breaker or blow a circuit. Check the cord attached to your stove to ensure that it isn’t damaged, exposed, or frayed.

4. Gas Stove Clicking Because of a Broken Spark Ignition Switch:

Sometimes your gas stove has a faulty igniter that only sparks and clicks, but doesn’t produce a flame. It is extremely unsafe to try to light the spark ignition switch yourself, and a professional can come and address faulty spark ignition switches, which we can replace for you.

Similarly to a defective igniter, your spark module may also be the reason your gas stove is clicking. A spark module sends igniter connections to your spark switch, but if you have faulty spark wires or a broken spark module, you won’t even hear the constant sparking sound you hear when you have a defective igniter.

Our stovetop repair services are available if you suspect that you have a faulty spark switch. Our professionals will start by removing the harness from the surface igniter switches. If the input to that spark module is disconnected, we will reconnect it and turn the power back on. If that doesn’t work, then we can replace the spark switches and the spark module, if necessary.

Gas Stove Still Clicking? If You Need Professional Stove Top Repair, Call Mr. Appliance of Kalamazoo!

Sometimes, appliances just don’t work properly due to the conditions they are in. If you tried all of the tips and tricks suggested in this article, then it’s time to call in the professionals. If you’re tired of the clicking noise on your gas stove because it follows up with no flames, then call us for a professional stove top repair service. If you tried cleaning your dirty burner heads, letting your stove tops air dry, making sure the gas supply line was on, and realigning the burner caps, but still cannot figure out why your gas stove is clicking, then call Mr. Appliance of Kalamazoo for professional stove top repair services. Our technicians can replace faulty parts to get you back to cooking your favorite meals again!

Prevent your gas stove from clicking by giving your stove tops proper care and routine maintenance. Cleaning spills promptly, drying the surface after it gets wet, getting regular checks on your gas connections and drain line, as well as regularly inspecting the power cords.

You can call us today for professional stove top repair services in Kalamazoo, Mattawan, and Portage to address why your gas stove is clicking.